We touch it, we transform it.
Materials and the exploitation of their full potential are the common denominators of our activities and the guiding principle of our development.
Our companies are active in the naval, energy, defense and broader industrial sectors.
Our companies are constantly anticipating and adapting to changes in markets, professions, materials, tools, uses, and customer and regulatory requirements.
Design engineering, specifications, coordination, industrial drawing, performance...
Welding, boiler making, mechanics, piping, assembly, electronics, industrialization, navigation, control, maintenance...
Purchasing, logistics procurement, reception, warehousing...
Operational management, local/service management, business management, project management...
Administrative and financial, legal, communication/marketing, human resources, cost, information systems.
"Passion and pride for the work to be done have been the hallmarks of our business since the beginning.
- more than 250 employees
- around 10% on apprenticeship or professionalization contracts
Your autonomy and initiative will be the key to your success with us!
In case of mobility, we will assist you in your installation process.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR INGENIERIE & PROCESS, a subsidiary of the EFINOR Group, a design office specializing in mechanical engineering, general installation and integration of technologies offering turnkey solutions, is currently recruiting a Boilermaking, Piping and Structures Designer.
As a Boilermaking, Piping and Structures Designer , you will be involved in a wide range of projects, working directly with customers, the team and suppliers.
Your assignments may involve working in our Engineering Department or providing technical assistance to our customers, depending on the project.
Your main tasks will be as follows:
- Research and propose solutions according to customer specifications,
- Perform pre-sizing and definition,
- Carry out on-site surveys as required,
- 3D modeling of boilermaking equipment, pressure equipment, piping lines, supports, structures and steelwork,
- Integrate technological equipment into designs,
- Produce drawings, bills of materials, detail drawings, bundles and associated notices,
- Take regulatory and standards requirements into account.
The expected profile is as follows:
- Trained to Level 5 or 6 in boiler making or equivalent, you have at least 3 years' experience as a design office draftsman,
- You are ideally familiar with SolidWorks or Autodesk software (Inventor, Autocad Plant 3D),
- You have good communication and interpersonal skills,
- Pragmatic profile with a taste for the field,
- Your knowledge of industry standards will be appreciated.
The position is full-time and open-ended, and is located in Toul, near Nancy, in the Meurthe-et-Moselle department (54). It requires regular travel to our customers' sites.
Your salary will be offered according to your qualifications and experience.
Are you interested in this offer? Does it correspond to your professional project? Then apply now!
This position is open to disabled workers with equal skills.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR Sea Cleaner, a subsidiary of the EFINOR Group, specializes in the design, manufacture and marketing of multi-service cleanup vessels with a unique and innovative patented technology.
As part of its activities, the company is recruiting an Industrial Storekeeper/Painter . Your main duties will be as follows:
On the store floor :
- Receive, store and make available all materials and finished products,
- Ensure the quality/conformity of the part, equipment or material,
- Identify incoming materials or products, arrange and classify them according to the store's internal methodology, and isolate/mark non-conforming materials or products,
- Prepare product distribution in the workshop,
- Manage inventory in the company's ERP and alert purchasing when a minimum threshold is reached,
- Manage any returns to suppliers,
- Carry out store inventory according to applicable procedures.
On the painting/finishing section:
- Check and prepare substrates before applying coatings or protection,
- Protect the work surface, ensure the validity of the products to be used and evaluate the necessary handling equipment with the hierarchy,
- Dose the various components and apply the material, taking into account application conditions and technical requirements for covering,
- Fill in production follow-up documents and quality supports,
- Carry out any necessary checks and touch-ups (sanding, painting, etc.).
Level 3 training in logistics or equivalent, with initial experience in industrial painting, enabling you to successfully carry out the tasks assigned.
If you're reactive, rigorous, autonomous, have a flair for organization and aesthetics, and good manual dexterity, then join our team. The position is full-time and open-ended, and is located in our Paimpol workshop, in the Côtes d'Armor department (22).
Your salary will be offered according to your qualifications and experience.
This opportunity interests you! So don't wait any longer and apply online!
With equal skills, internship open to disabled workers.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR Sea Cleaner, a subsidiary of the EFINOR Group, specializes in the design, manufacture and marketing of multi-service cleanup vessels with a unique and innovative patented technology.
As part of its activities, the company is recruiting a Local Manager - Naval Mechanic and Electrician.
Your main tasks will be as follows:
On the managerial side:
- Manage, lead and supervise the work of one or more teams of electrical and marine mechanics employees,
- Provide technical support to staff in carrying out their tasks,
- Check that production stages are running smoothly and on schedule, and report daily to your N+1,
- Identify and remedy any malfunctions,
- Check that work tracking documents are correctly completed,
On naval mechanics and electricity:
- Assemble the various mechanical components (motor installation),
- Make hydraulic, electrical and mechanical connections to equipment and accessories,
- Test and commission the system,
- Install low-power hydraulic components on the vessel,
- Maintain existing vessels: engines, hydraulics, electricity.
With level 3 training in mechanics, naval electricity or equivalent, you will have initial experience in a similar position, enabling you to successfully carry out the tasks entrusted to you.
You have a sense of responsibility, you're rigorous, responsive and a strong team player to meet the company's challenges. The position is full-time and open-ended, and is located in our Paimpol workshop, in the Côtes d'Armor department (22).
Your salary will be offered according to your qualifications and experience.
This opportunity interests you! So don't wait any longer and apply online!
With equal skills, internship open to disabled workers.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR ALLAIS, a subsidiary of the EFINOR Group specialized in the manufacture of professional vessels, is developing its know-how in the civil markets (offshore oil and gas, wind energy, service vessels, etc.).
As part of its business development, EFINOR ALLAIS is looking to strengthen its teams by recruiting anElectrical Design Engineer.
Your main missions will be the following:
- Design electrical diagrams and corresponding panels,
- Determine the products needed to produce the paintings,
- Coordinate the electrical team's activities (planning...),
- Diagnose and solve electrical problems related to the products, equipment and systems for which he/she is responsible,
- Inspect electrical installations,
- Build up a database and capitalize on feedback from the studies entrusted to us,
- Monitor products and equipment,
- Carry out feasibility studies for technical innovations.
Trained to level 7 in electrical engineering or equivalent, you will have gained initial similar experience in the naval sector.
Your rigor, methodology and analytical skills are essential assets for successfully completing the assignments entrusted to you.
The position ofElectrical Design Engineer is full-time and open-ended, and is located in Cherbourg-en Cotentin, in the Manche department (50).
Your salary will be offered according to your qualifications and experience.
Are you interested in this offer? Does it correspond to your professional project? Then don't wait any longer and submit your application online!
With equal skills, position open to disabled workers.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR METAL, a subsidiary of the EFINOR Group, specializes in turnkey projects: engineering, manufacturing, assembly and acceptance in the fields of industry in general with a strong specialization in the naval sector.
As part of its activities, the company is currently recruiting an Account Manager whose main responsibilities will be to :
- Respond to customer requests by analyzing their needs and proposing the most appropriate solution(s),
- Monitor the portals dedicated to calls for tender in order to position the company technically on those relevant to its activities,
- Canvass the target market,
- Define the human and material resources needed to make the project feasible, and identify any partners and subcontractors required,
- Draw up costings, taking into account the technical expertise of the company's relevant departments, and carry out risk analyses for presentation to operational management,
- Organize and conduct in-house commissioning meetings,
- Monitor and coordinate all operations, ensuring their proper execution: from contract negotiation to invoicing,
- Follow up the project on the company's ERP system,
- Approve quality documents for submission to the customer,
- Maintain good customer relations.
Expected skills :
A level 5 diploma in business or equivalent would be appreciated with initial experience in a similar position.
A good command of business management and project management techniques in the industrial field and a good knowledge of manufacturing processes are required.
Your ability to listen and negotiate, your responsiveness, your rigor and your good interpersonal skills are essential to successfully carry out the missions entrusted to you.
Would you like to be at the heart of the action at an industrial site? Don't wait any longer and apply online!
The position is full-time and open-ended. It is located at the Cherbourg-en-Cotentin naval base in the Manche département (50). Your salary will be commensurate with your qualifications and experience.
This position is open to disabled workers with equal skills.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR METAL, a subsidiary of the EFINOR Group, specializes in turnkey projects: engineering, manufacturing, assembly through to acceptance, in the fields of industry in general, with a strong specialization in the naval sector.
EFINOR METAL is looking to strengthen its teams by recruiting a Quality Technician.
Your main missions will be the following:
- Participate in internal initiation meetings and identify the need for drafting procedures,
- Assist technical departments in drafting the various documents required,
- To check the documentary conformity of the manufacture of products, parts or sub-assemblies carried out in the workshop during the various production phases, within the framework of the construction of the final file,
- Monitor and control the application of rules, procedures and quality instructions, in particular by carrying out unannounced inspections and/or internal audits,
- Participate in supplier inspections,
- Ensure customer relations in conjunction with the Business Manager,
- Identify and deal with non-conformities,
- Centralize all quality records to create the final file, and check their completeness.
You have a level 5 qualification in quality or equivalent, and initial experience of a similar nature in the industrial sector.
Your sense of organization, your rigor and your interpersonal skills are essential assets to successfully complete the missions entrusted to you.
The Quality Technician position on offer is full-time and open-ended, and is located in Cherbourg-en Cotentin, in the Manche département (50).
Your salary will be offered according to your qualifications and experience.
Are you interested in this offer? Does it correspond to your professional project? Then don't wait any longer and apply online!
With equal skills, position open to disabled workers.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR Interventions, a subsidiary of the EFINOR group, is specialized in industrial maintenance and piping. The teams intervene mainly on customer sites in order to take charge of the entrusted maintenance sites.
As part of the development of its activities, EFINOR Interventions is looking to strengthen its team by recruiting a Maintenance Technician.
As a Maintenance Technician, your main tasks will be to
- Apply the instructions given by your superiors and refer to the defined intervention schedule,
- Carry out regular checks and diagnostics as part of preventive maintenance,
- Identify and deal with faults by cleaning, repairing or replacing parts,
- Fill in technical documents,
- Check that all products/consumables are available before intervention,
- Schedule and monitor regulatory inspections (electrical installations, bridges, etc.) and periodic equipment checks.
You have a level 4 diploma or equivalent in industrial maintenance, and initial professional experience. Knowledge of manufacturing, installation and maintenance methods, and of the associated regulations/trade standards, will be essential for this position.
You have a good understanding of production tool data sheets and equipment operation, as well as job-related software.
If you are rigorous, organized, reactive and want to join a dynamic team, then this is the job for you!
The Maintenance Technician position is full-time and open-ended, and is located in Cherbourg-en-Cotentin, in the Manche département (50).
Your salary will be offered according to your qualifications and experience.
Equally qualified, position open to disabled workers.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
As a shareholder in Normandy Hadrontherapy, the EFINOR Group is participating alongside the Belgian company IBA in the construction and installation of a second-generation cyclotron gas pedal for the treatment of certain cancers.
In this context, EFINORINGENIERIE & PROCESS is recruiting a Biomedical Requirements & Risks Engineer to support the development of this promising medical equipment.
As an Engineer, your main tasks will be to:
- Get to know the manufacturer's products, including the Cyclotron C400 IONS,
- Create and write risk analyses, specification documents and explicit information based on IBA's and Nha's own technical knowledge,
- Create and organize document reviews in Requirements & Risks, modify procedures in Quality,
- Prepare progress reports, intra-project meetings and project progress reports,
-Act as the interface for Requirements & Risks management and expertise within the project on the NHa side, and take part in related workshops and meetings.
With a Bac+5 generalist degree in Biomedical or Biotechnology (e.g. Institut Supérieur des Biosciences de Paris, Institut Supérieur d'Ingénieurs de Franche-Comté - Génie Biomédical, École Supérieure de Biotechnologie de Strasbourg), you are a beginner and/or have initial experience that will enable you to successfully carry out the tasks entrusted to you.
You have a strong technical aptitude (robotics, particle physics, electronics, cryogenics, radioactivity), you are familiar with the relevant standards (IEC 60601-1, ISO 14971...) and your level of oral/written English is CEFR B2.
In terms of interpersonal skills, we're looking for a self-starter with organizational rigor and good interpersonal skills.
Your ability to write and summarize will also be an invaluable asset.
You think you have what it takes! Then apply now!
TheBiomedical Requirements & Risks Engineer position is a full-time, open-ended position based in Louvain-La-Neuve, Belgium, at IBA. Occasional travel to Caen is possible.
Your salary will be offered according to your qualifications and experience.
This position is open to disabled workers with equal skills.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR METAL, a subsidiary of the EFINOR group, specializes in turnkey projects: engineering, manufacturing, assembly and acceptance in general industry, with a strong focus on the naval sector.
As part of its activities, the company is currently recruiting a Project Manager whose main tasks will be to :
- Analyze/detect customer needs,
- Draw up the overall action plan for the project from the design phase through to completion (schedule, budget, risk analysis, etc.),
- Draw up specifications and contract with any subcontractors,
- Coordinate the operations of all the players involved in the project,
- Monitor and control project progress, schedule execution and budget compliance, through regular reviews with all stakeholders,
- Provide functional and technical expertise to production teams,
- Report on progress to the customer,
- Monitor and finalize the project, if necessary taking corrective action in conjunction with the customer,
- Provide feedback (positive or negative aspects, "best practices", suggestions for improving future projects, etc.),
- Ensure final project reporting to Operations and/or General Management.
Expected skills :
A level 7 diploma in general engineering, technical master's degree or equivalent would be appreciated, with initial experience in a similar position.
A good command of project management techniques and knowledge of manufacturing processes are required.
Your rigor, interpersonal skills, strength of conviction and argumentation are essential to successfully complete the missions entrusted to you.
Would you like to be at the heart of the action at an industrial site? Don't wait any longer and apply online!
The position is full-time and open-ended. It is based at the Cherbourg-en-Cotentin naval base in the Manche département (50).
Your salary will be offered according to your qualifications and experience.
This position is open to disabled workers with equal skills.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR Sea Cleaner, a subsidiary of the EFINOR Group, specializes in the design, manufacture and marketing of multi-service cleanup vessels with a unique and innovative patented technology.
The company EFINOR Sea Cleaner offers an internship of end of studies ofNaval Architect Engineer.
Reporting to the Head of the design office, your internship missions will be the following:
- Realization of preliminary project of ship,
- Realization of detailed project of ship,
- Development of pollution control vessels in the catalog (electrification, improved pollution control capacity, etc.),
- Site supervision,
- Optimization of design methods.
You are currently in engineering school in naval architecture, you are rigorous, organized and dynamic.
Your training has made you discover the software Rhinoceros, Autocad, Maat Hydro, Starboat, you have knowledge of the BV and maritime affairs regulations, of structural and stability calculations and you have the will to put your knowledge into practice on the ground.
The proposed 6-monthNaval Architect Engineer internship (starting February/March 2025) is located in Paimpol in the Côtes d'Armor department (22).
In accordance with the regulations in force, you will receive a bonus.
Are you interested in this offer and does it fit in with your future career plans? Then submit your application online with your CV and cover letter, and we will contact you!
With equal skills, internship open to disabled workers.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR ALLAIS, a subsidiary of the EFINOR Group specialized in the manufacture of professional vessels, is developing its know-how in the civil markets (offshore oil and gas, wind energy, service vessels, etc.).
As part of its business development, EFINOR ALLAIS is looking to strengthen its teams by recruiting a Pipe/Boilerwork Preparer.
Reporting to the Activity Manager, your main missions will be the following:
With a level 2 diploma in design and industrialization or equivalent, you have a good knowledge of standards, design processes and production techniques. Knowledge of the naval sector is a real asset for this position.
Proficiency in reading and interpreting blueprints and job-related computer tools/software is required.
If you are rigorous, autonomous, a self-starter with good interpersonal skills, apply online now to join a dynamic company!
The Preparer position is full-time, open-ended and available immediately. It is located in Cherbourg, in the Manche department (50).
Your remuneration will be offered according to your profile.
With equal skills, position open to disabled workers.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR INGENIERIE& PROCESS, a subsidiary of the EFINOR Group, is a design office specializing in mechanical engineering, general installation and technology integration, offering turnkey solutions. As part of the growth of its activities, EFINOR INGENIERIE& PROCESS is recruiting anexperienced Mechanical Design Draughtsman.
As an experienced Mechanical Design Draughtsman, your main tasks will be to will be as follows:
In the costing phase:
- Research and propose technical solutions according to customer needs,
- Preliminary CAD mock-ups,
- Machine pre-sizing and pre-definition of commercial equipment.
In the business execution phase :
- Carry out surveys on customer sites,
- Complete 3D modeling of production tools, special machines, production lines, handling equipment in their environment
- Integrate technological equipment into designs (pneumatics, sensors, PLCs, vision systems, etc.)
- Produce drawings, bills of materials, detail drawings, bundles and associated notices,
- Take into account the regulatory and normative requirements.
→ A true technician at heart:
- You're at ease and you like technology: with a good experience in the field of special machines and mechanics, you know the standards of the trade.
- You will be responsible for most of the technical aspects of the projects entrusted to you, working under the supervision of the Mechanical Design Manager and in conjunction with the project managers.
- You are familiar with SolidWorks. Skills in other CAD software are appreciated (Inventor, Creo, Catia V5, Autocad2D...).
→ The expected profile is as follows:
- Trained to Bac+2 or Bac+3 in mechanical engineering or equivalent, you have at least 5 years' experience enabling you to successfully carry out the tasks entrusted to you.
- Rigorous, committed and pragmatic with a strong taste for the field, you know how to manage your files with rigor and autonomy.
The position of Experienced Mechanical Draughtsman/Designer is full-time and open-ended, and is located in Toul, near Nancy, in the Meurthe-et-Moselle department (54). You may be required to work in our design office or provide technical assistance to our customers, depending on the project (mainly in the north-east of France, in the following sectors: automotive, energy, steel, Oil&Gas, chemicals, etc.).
Your salary will be offered according to your qualifications and experience.
Are you interested in this offer? Does it match your career plan? Then apply now! With equal skills, this position is open to disabled workers.
The EFINOR group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly carried out in the naval, oil & gas, environmental and industrial sectors, in France and abroad. Our companies, experts and recognised in their fields, make it a point of honour to preserve the human dimension and to value the commitment of its employees.
EFINOR Interventions, a subsidiary of the EFINOR group, is specialized in industrial maintenance and piping. The teams intervene mainly on customer sites in order to take charge of the entrusted maintenance sites.
Within the framework of the development of its activities, the company EFINOR Interventions has to reinforce its team by recruiting an Industrial Pipefitter.
As an Industrial Pipefitter, your missions will be the following:
- Ensure the taking of dimensions on site,
- To carry out the bending of the various tubes (aluminium, steel, stainless, pvc),
- Perform tube tracing and cone forming,
- Proceed to the pointing of the tubes,
- Ensure the commissioning tests,
- To carry out the assembly of the material.
With a level 3 or 4 diploma in piping, industrial boiler making, welding or equivalent, you have a first experience in this field.
Reading blueprints, assembly, bolting, welding... are no longer a secret to you! A bridge operator qualification would be a plus.
The position of Industrial Pipefitter is a full time, permanent position located in Cherbourg, in the Manche department (50).
Your salary will be offered according to your qualifications and experience.
Equally qualified, position open to disabled workers.
The EFINOR group, founded in 1988 by its current President Fabrice LEPOTIER, is an industrial group whose DNA is metal working. Our engineering, manufacturing and maintenance activities are mainly carried out in the naval, oil & gas, environmental and industrial sectors, in France and abroad. Our companies, experts and recognized in their fields, make it a point of honor to preserve the human dimension and the valorization of the commitment of its employees.
Within the framework of the development of its activities, several companies of the EFINOR group have to reinforce their teams by recruiting MIG MAG welders.
Working with steel and aluminum for the manufacture of our boats or equipment in various fields (naval, nuclear, public, military...), your main missions will be the following:
With a CAP/BEP training with a specialization in welding or equivalent, you have a first successful experience in the trade.
You are rigorous, have good interpersonal skills to facilitate teamwork and appreciate versatility.
You master the reading of welding specifications and associated drawings.
The MIG MAG welder positions offered at are full-time and open-ended, and are located in our Cherbourg workshops, in the Manche department (50).
Your salary will be offered according to your qualifications and experience.
Are you interested in this opportunity? Then don't wait any longer and apply online !
Equally qualified, position open to disabled workers.
The EFINOR group, founded in 1988 by its current President Fabrice LEPOTIER, is an industrial group whose DNA is metal working. Our engineering, manufacturing and maintenance activities are mainly carried out in the naval, oil & gas, environmental and industrial sectors, in France and abroad. Our companies, experts and recognized in their fields, make it a point of honor to preserve the human dimension and the valorization of the commitment of its employees.
Within the framework of the development of its activities, several companies of the EFINOR group have to reinforce their teams by recruiting Boilermakers F/H.
Reporting directly to the local manager, you will manufacture new boilermade parts in the workshop, or repair used parts according to plans and associated directives. For this, your main missions will be the following:
With a CAP in boiler making up to a BTS in industrial boiler making, you have a first experience in the trade.
This position requires rigor, a taste for manual work and the ability to work in a team.
Your involvement, your professionalism and your team spirit are all assets that we are looking for for this position, they will allow you to develop a real career path within our Group.
The positions offered are full-time and open-ended, and are located in our Cherbourg workshops, in the Manche department (50).
Your salary will be offered according to your qualifications and experience.
Are you interested in this opportunity? Then don't wait any longer and apply online !
Equally qualified, position open to disabled workers.
Locations: TOUL and GONDRECOURT LE CHATEAU
Staff: 12
Recruitment manager: Jean-Philippe GENOIS - 06 87 35 58 38 / 03 29 91 43 85
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR INGENIERIE & PROCESS, a subsidiary of the EFINOR Group, a design office specializing in mechanical engineering, general installation and integration of technologies offering turnkey solutions, is currently recruiting a Boilermaking, Piping and Structures Designer.
As a Boilermaking, Piping and Structures Designer , you will be involved in a wide range of projects, working directly with customers, the team and suppliers.
Your assignments may involve working in our Engineering Department or providing technical assistance to our customers, depending on the project.
Your main tasks will be as follows:
- Research and propose solutions according to customer specifications,
- Perform pre-sizing and definition,
- Carry out on-site surveys as required,
- 3D modeling of boilermaking equipment, pressure equipment, piping lines, supports, structures and steelwork,
- Integrate technological equipment into designs,
- Produce drawings, bills of materials, detail drawings, bundles and associated notices,
- Take regulatory and standards requirements into account.
The expected profile is as follows:
- Trained to Level 5 or 6 in boiler making or equivalent, you have at least 3 years' experience as a design office draftsman,
- You are ideally familiar with SolidWorks or Autodesk software (Inventor, Autocad Plant 3D),
- You have good communication and interpersonal skills,
- Pragmatic profile with a taste for the field,
- Your knowledge of industry standards will be appreciated.
The position is full-time and open-ended, and is located in Toul, near Nancy, in the Meurthe-et-Moselle department (54). It requires regular travel to our customers' sites.
Your salary will be offered according to your qualifications and experience.
Are you interested in this offer? Does it correspond to your professional project? Then apply now!
This position is open to disabled workers with equal skills.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
As a shareholder in Normandy Hadrontherapy, the EFINOR Group is participating alongside the Belgian company IBA in the construction and installation of a second-generation cyclotron gas pedal for the treatment of certain cancers.
In this context, EFINORINGENIERIE & PROCESS is recruiting a Biomedical Requirements & Risks Engineer to support the development of this promising medical equipment.
As an Engineer, your main tasks will be to:
- Get to know the manufacturer's products, including the Cyclotron C400 IONS,
- Create and write risk analyses, specification documents and explicit information based on IBA's and Nha's own technical knowledge,
- Create and organize document reviews in Requirements & Risks, modify procedures in Quality,
- Prepare progress reports, intra-project meetings and project progress reports,
-Act as the interface for Requirements & Risks management and expertise within the project on the NHa side, and take part in related workshops and meetings.
With a Bac+5 generalist degree in Biomedical or Biotechnology (e.g. Institut Supérieur des Biosciences de Paris, Institut Supérieur d'Ingénieurs de Franche-Comté - Génie Biomédical, École Supérieure de Biotechnologie de Strasbourg), you are a beginner and/or have initial experience that will enable you to successfully carry out the tasks entrusted to you.
You have a strong technical aptitude (robotics, particle physics, electronics, cryogenics, radioactivity), you are familiar with the relevant standards (IEC 60601-1, ISO 14971...) and your level of oral/written English is CEFR B2.
In terms of interpersonal skills, we're looking for a self-starter with organizational rigor and good interpersonal skills.
Your ability to write and summarize will also be an invaluable asset.
You think you have what it takes! Then apply now!
TheBiomedical Requirements & Risks Engineer position is a full-time, open-ended position based in Louvain-La-Neuve, Belgium, at IBA. Occasional travel to Caen is possible.
Your salary will be offered according to your qualifications and experience.
This position is open to disabled workers with equal skills.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR INGENIERIE& PROCESS, a subsidiary of the EFINOR Group, is a design office specializing in mechanical engineering, general installation and technology integration, offering turnkey solutions. As part of the growth of its activities, EFINOR INGENIERIE& PROCESS is recruiting anexperienced Mechanical Design Draughtsman.
As an experienced Mechanical Design Draughtsman, your main tasks will be to will be as follows:
In the costing phase:
- Research and propose technical solutions according to customer needs,
- Preliminary CAD mock-ups,
- Machine pre-sizing and pre-definition of commercial equipment.
In the business execution phase :
- Carry out surveys on customer sites,
- Complete 3D modeling of production tools, special machines, production lines, handling equipment in their environment
- Integrate technological equipment into designs (pneumatics, sensors, PLCs, vision systems, etc.)
- Produce drawings, bills of materials, detail drawings, bundles and associated notices,
- Take into account the regulatory and normative requirements.
→ A true technician at heart:
- You're at ease and you like technology: with a good experience in the field of special machines and mechanics, you know the standards of the trade.
- You will be responsible for most of the technical aspects of the projects entrusted to you, working under the supervision of the Mechanical Design Manager and in conjunction with the project managers.
- You are familiar with SolidWorks. Skills in other CAD software are appreciated (Inventor, Creo, Catia V5, Autocad2D...).
→ The expected profile is as follows:
- Trained to Bac+2 or Bac+3 in mechanical engineering or equivalent, you have at least 5 years' experience enabling you to successfully carry out the tasks entrusted to you.
- Rigorous, committed and pragmatic with a strong taste for the field, you know how to manage your files with rigor and autonomy.
The position of Experienced Mechanical Draughtsman/Designer is full-time and open-ended, and is located in Toul, near Nancy, in the Meurthe-et-Moselle department (54). You may be required to work in our design office or provide technical assistance to our customers, depending on the project (mainly in the north-east of France, in the following sectors: automotive, energy, steel, Oil&Gas, chemicals, etc.).
Your salary will be offered according to your qualifications and experience.
Are you interested in this offer? Does it match your career plan? Then apply now! With equal skills, this position is open to disabled workers.
Location: Melun & Reims
Number of employees: 49
Recruitment manager : Didier BAPT - 01 64 39 23 03
Location: CHERBOURG-EN-COTENTIN
Staff: 51
Recruitment manager: Christophe POIZEAU - 02 33 44 32 59
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR METAL, a subsidiary of the EFINOR Group, specializes in turnkey projects: engineering, manufacturing, assembly and acceptance in the fields of industry in general with a strong specialization in the naval sector.
As part of its activities, the company is currently recruiting an Account Manager whose main responsibilities will be to :
- Respond to customer requests by analyzing their needs and proposing the most appropriate solution(s),
- Monitor the portals dedicated to calls for tender in order to position the company technically on those relevant to its activities,
- Canvass the target market,
- Define the human and material resources needed to make the project feasible, and identify any partners and subcontractors required,
- Draw up costings, taking into account the technical expertise of the company's relevant departments, and carry out risk analyses for presentation to operational management,
- Organize and conduct in-house commissioning meetings,
- Monitor and coordinate all operations, ensuring their proper execution: from contract negotiation to invoicing,
- Follow up the project on the company's ERP system,
- Approve quality documents for submission to the customer,
- Maintain good customer relations.
Expected skills :
A level 5 diploma in business or equivalent would be appreciated with initial experience in a similar position.
A good command of business management and project management techniques in the industrial field and a good knowledge of manufacturing processes are required.
Your ability to listen and negotiate, your responsiveness, your rigor and your good interpersonal skills are essential to successfully carry out the missions entrusted to you.
Would you like to be at the heart of the action at an industrial site? Don't wait any longer and apply online!
The position is full-time and open-ended. It is located at the Cherbourg-en-Cotentin naval base in the Manche département (50). Your salary will be commensurate with your qualifications and experience.
This position is open to disabled workers with equal skills.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR METAL, a subsidiary of the EFINOR Group, specializes in turnkey projects: engineering, manufacturing, assembly through to acceptance, in the fields of industry in general, with a strong specialization in the naval sector.
EFINOR METAL is looking to strengthen its teams by recruiting a Quality Technician.
Your main missions will be the following:
- Participate in internal initiation meetings and identify the need for drafting procedures,
- Assist technical departments in drafting the various documents required,
- To check the documentary conformity of the manufacture of products, parts or sub-assemblies carried out in the workshop during the various production phases, within the framework of the construction of the final file,
- Monitor and control the application of rules, procedures and quality instructions, in particular by carrying out unannounced inspections and/or internal audits,
- Participate in supplier inspections,
- Ensure customer relations in conjunction with the Business Manager,
- Identify and deal with non-conformities,
- Centralize all quality records to create the final file, and check their completeness.
You have a level 5 qualification in quality or equivalent, and initial experience of a similar nature in the industrial sector.
Your sense of organization, your rigor and your interpersonal skills are essential assets to successfully complete the missions entrusted to you.
The Quality Technician position on offer is full-time and open-ended, and is located in Cherbourg-en Cotentin, in the Manche département (50).
Your salary will be offered according to your qualifications and experience.
Are you interested in this offer? Does it correspond to your professional project? Then don't wait any longer and apply online!
With equal skills, position open to disabled workers.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR METAL, a subsidiary of the EFINOR group, specializes in turnkey projects: engineering, manufacturing, assembly and acceptance in general industry, with a strong focus on the naval sector.
As part of its activities, the company is currently recruiting a Project Manager whose main tasks will be to :
- Analyze/detect customer needs,
- Draw up the overall action plan for the project from the design phase through to completion (schedule, budget, risk analysis, etc.),
- Draw up specifications and contract with any subcontractors,
- Coordinate the operations of all the players involved in the project,
- Monitor and control project progress, schedule execution and budget compliance, through regular reviews with all stakeholders,
- Provide functional and technical expertise to production teams,
- Report on progress to the customer,
- Monitor and finalize the project, if necessary taking corrective action in conjunction with the customer,
- Provide feedback (positive or negative aspects, "best practices", suggestions for improving future projects, etc.),
- Ensure final project reporting to Operations and/or General Management.
Expected skills :
A level 7 diploma in general engineering, technical master's degree or equivalent would be appreciated, with initial experience in a similar position.
A good command of project management techniques and knowledge of manufacturing processes are required.
Your rigor, interpersonal skills, strength of conviction and argumentation are essential to successfully complete the missions entrusted to you.
Would you like to be at the heart of the action at an industrial site? Don't wait any longer and apply online!
The position is full-time and open-ended. It is based at the Cherbourg-en-Cotentin naval base in the Manche département (50).
Your salary will be offered according to your qualifications and experience.
This position is open to disabled workers with equal skills.
Location: CHERBOURG-EN-COTENTIN
Workforce: 18 people
Recruitment manager: Paul-Henri MOUCHEL - 02 33 44 64 46
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR Interventions, a subsidiary of the EFINOR group, is specialized in industrial maintenance and piping. The teams intervene mainly on customer sites in order to take charge of the entrusted maintenance sites.
As part of the development of its activities, EFINOR Interventions is looking to strengthen its team by recruiting a Maintenance Technician.
As a Maintenance Technician, your main tasks will be to
- Apply the instructions given by your superiors and refer to the defined intervention schedule,
- Carry out regular checks and diagnostics as part of preventive maintenance,
- Identify and deal with faults by cleaning, repairing or replacing parts,
- Fill in technical documents,
- Check that all products/consumables are available before intervention,
- Schedule and monitor regulatory inspections (electrical installations, bridges, etc.) and periodic equipment checks.
You have a level 4 diploma or equivalent in industrial maintenance, and initial professional experience. Knowledge of manufacturing, installation and maintenance methods, and of the associated regulations/trade standards, will be essential for this position.
You have a good understanding of production tool data sheets and equipment operation, as well as job-related software.
If you are rigorous, organized, reactive and want to join a dynamic team, then this is the job for you!
The Maintenance Technician position is full-time and open-ended, and is located in Cherbourg-en-Cotentin, in the Manche département (50).
Your salary will be offered according to your qualifications and experience.
Equally qualified, position open to disabled workers.
The EFINOR group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly carried out in the naval, oil & gas, environmental and industrial sectors, in France and abroad. Our companies, experts and recognised in their fields, make it a point of honour to preserve the human dimension and to value the commitment of its employees.
EFINOR Interventions, a subsidiary of the EFINOR group, is specialized in industrial maintenance and piping. The teams intervene mainly on customer sites in order to take charge of the entrusted maintenance sites.
Within the framework of the development of its activities, the company EFINOR Interventions has to reinforce its team by recruiting an Industrial Pipefitter.
As an Industrial Pipefitter, your missions will be the following:
- Ensure the taking of dimensions on site,
- To carry out the bending of the various tubes (aluminium, steel, stainless, pvc),
- Perform tube tracing and cone forming,
- Proceed to the pointing of the tubes,
- Ensure the commissioning tests,
- To carry out the assembly of the material.
With a level 3 or 4 diploma in piping, industrial boiler making, welding or equivalent, you have a first experience in this field.
Reading blueprints, assembly, bolting, welding... are no longer a secret to you! A bridge operator qualification would be a plus.
The position of Industrial Pipefitter is a full time, permanent position located in Cherbourg, in the Manche department (50).
Your salary will be offered according to your qualifications and experience.
Equally qualified, position open to disabled workers.
Location: CHERBOURG-EN-COTENTIN
Staff: 15 people
Recruitment Manager: Christophe POIZEAU - 02 33 97 33 49
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR ALLAIS, a subsidiary of the EFINOR Group specialized in the manufacture of professional vessels, is developing its know-how in the civil markets (offshore oil and gas, wind energy, service vessels, etc.).
As part of its business development, EFINOR ALLAIS is looking to strengthen its teams by recruiting anElectrical Design Engineer.
Your main missions will be the following:
- Design electrical diagrams and corresponding panels,
- Determine the products needed to produce the paintings,
- Coordinate the electrical team's activities (planning...),
- Diagnose and solve electrical problems related to the products, equipment and systems for which he/she is responsible,
- Inspect electrical installations,
- Build up a database and capitalize on feedback from the studies entrusted to us,
- Monitor products and equipment,
- Carry out feasibility studies for technical innovations.
Trained to level 7 in electrical engineering or equivalent, you will have gained initial similar experience in the naval sector.
Your rigor, methodology and analytical skills are essential assets for successfully completing the assignments entrusted to you.
The position ofElectrical Design Engineer is full-time and open-ended, and is located in Cherbourg-en Cotentin, in the Manche department (50).
Your salary will be offered according to your qualifications and experience.
Are you interested in this offer? Does it correspond to your professional project? Then don't wait any longer and submit your application online!
With equal skills, position open to disabled workers.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR ALLAIS, a subsidiary of the EFINOR Group specialized in the manufacture of professional vessels, is developing its know-how in the civil markets (offshore oil and gas, wind energy, service vessels, etc.).
As part of its business development, EFINOR ALLAIS is looking to strengthen its teams by recruiting a Pipe/Boilerwork Preparer.
Reporting to the Activity Manager, your main missions will be the following:
With a level 2 diploma in design and industrialization or equivalent, you have a good knowledge of standards, design processes and production techniques. Knowledge of the naval sector is a real asset for this position.
Proficiency in reading and interpreting blueprints and job-related computer tools/software is required.
If you are rigorous, autonomous, a self-starter with good interpersonal skills, apply online now to join a dynamic company!
The Preparer position is full-time, open-ended and available immediately. It is located in Cherbourg, in the Manche department (50).
Your remuneration will be offered according to your profile.
With equal skills, position open to disabled workers.
Location: PAIMPOL
Workforce: 23 people
Recruitment manager: Benjamin LERONDEAU - 02 96 20 33 18
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR Sea Cleaner, a subsidiary of the EFINOR Group, specializes in the design, manufacture and marketing of multi-service cleanup vessels with a unique and innovative patented technology.
As part of its activities, the company is recruiting an Industrial Storekeeper/Painter . Your main duties will be as follows:
On the store floor :
- Receive, store and make available all materials and finished products,
- Ensure the quality/conformity of the part, equipment or material,
- Identify incoming materials or products, arrange and classify them according to the store's internal methodology, and isolate/mark non-conforming materials or products,
- Prepare product distribution in the workshop,
- Manage inventory in the company's ERP and alert purchasing when a minimum threshold is reached,
- Manage any returns to suppliers,
- Carry out store inventory according to applicable procedures.
On the painting/finishing section:
- Check and prepare substrates before applying coatings or protection,
- Protect the work surface, ensure the validity of the products to be used and evaluate the necessary handling equipment with the hierarchy,
- Dose the various components and apply the material, taking into account application conditions and technical requirements for covering,
- Fill in production follow-up documents and quality supports,
- Carry out any necessary checks and touch-ups (sanding, painting, etc.).
Level 3 training in logistics or equivalent, with initial experience in industrial painting, enabling you to successfully carry out the tasks assigned.
If you're reactive, rigorous, autonomous, have a flair for organization and aesthetics, and good manual dexterity, then join our team. The position is full-time and open-ended, and is located in our Paimpol workshop, in the Côtes d'Armor department (22).
Your salary will be offered according to your qualifications and experience.
This opportunity interests you! So don't wait any longer and apply online!
With equal skills, internship open to disabled workers.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR Sea Cleaner, a subsidiary of the EFINOR Group, specializes in the design, manufacture and marketing of multi-service cleanup vessels with a unique and innovative patented technology.
As part of its activities, the company is recruiting a Local Manager - Naval Mechanic and Electrician.
Your main tasks will be as follows:
On the managerial side:
- Manage, lead and supervise the work of one or more teams of electrical and marine mechanics employees,
- Provide technical support to staff in carrying out their tasks,
- Check that production stages are running smoothly and on schedule, and report daily to your N+1,
- Identify and remedy any malfunctions,
- Check that work tracking documents are correctly completed,
On naval mechanics and electricity:
- Assemble the various mechanical components (motor installation),
- Make hydraulic, electrical and mechanical connections to equipment and accessories,
- Test and commission the system,
- Install low-power hydraulic components on the vessel,
- Maintain existing vessels: engines, hydraulics, electricity.
With level 3 training in mechanics, naval electricity or equivalent, you will have initial experience in a similar position, enabling you to successfully carry out the tasks entrusted to you.
You have a sense of responsibility, you're rigorous, responsive and a strong team player to meet the company's challenges. The position is full-time and open-ended, and is located in our Paimpol workshop, in the Côtes d'Armor department (22).
Your salary will be offered according to your qualifications and experience.
This opportunity interests you! So don't wait any longer and apply online!
With equal skills, internship open to disabled workers.
The EFINOR Group, founded in 1988 by its current Chairman Fabrice LEPOTIER, is an industrial group whose DNA is metalworking. Our engineering, manufacturing and maintenance activities are mainly focused on the naval, energy and defense sectors, both in France and abroad. Our companies, experts and recognized in their fields, make a point of preserving the human dimension and valuing the commitment of their employees.
EFINOR Sea Cleaner, a subsidiary of the EFINOR Group, specializes in the design, manufacture and marketing of multi-service cleanup vessels with a unique and innovative patented technology.
The company EFINOR Sea Cleaner offers an internship of end of studies ofNaval Architect Engineer.
Reporting to the Head of the design office, your internship missions will be the following:
- Realization of preliminary project of ship,
- Realization of detailed project of ship,
- Development of pollution control vessels in the catalog (electrification, improved pollution control capacity, etc.),
- Site supervision,
- Optimization of design methods.
You are currently in engineering school in naval architecture, you are rigorous, organized and dynamic.
Your training has made you discover the software Rhinoceros, Autocad, Maat Hydro, Starboat, you have knowledge of the BV and maritime affairs regulations, of structural and stability calculations and you have the will to put your knowledge into practice on the ground.
The proposed 6-monthNaval Architect Engineer internship (starting February/March 2025) is located in Paimpol in the Côtes d'Armor department (22).
In accordance with the regulations in force, you will receive a bonus.
Are you interested in this offer and does it fit in with your future career plans? Then submit your application online with your CV and cover letter, and we will contact you!
With equal skills, internship open to disabled workers.
Location: CHERBOURG-EN-COTENTIN
Staff: 3 people
Recruitment manager: Stéphanie Laurent- 07 76 81 83 56
The EFINOR group, founded in 1988 by its current President Fabrice LEPOTIER, is an industrial group whose DNA is metal working. Our engineering, manufacturing and maintenance activities are mainly carried out in the naval, oil & gas, environmental and industrial sectors, in France and abroad. Our companies, experts and recognized in their fields, make it a point of honor to preserve the human dimension and the valorization of the commitment of its employees.
Within the framework of the development of its activities, several companies of the EFINOR group have to reinforce their teams by recruiting MIG MAG welders.
Working with steel and aluminum for the manufacture of our boats or equipment in various fields (naval, nuclear, public, military...), your main missions will be the following:
With a CAP/BEP training with a specialization in welding or equivalent, you have a first successful experience in the trade.
You are rigorous, have good interpersonal skills to facilitate teamwork and appreciate versatility.
You master the reading of welding specifications and associated drawings.
The MIG MAG welder positions offered at are full-time and open-ended, and are located in our Cherbourg workshops, in the Manche department (50).
Your salary will be offered according to your qualifications and experience.
Are you interested in this opportunity? Then don't wait any longer and apply online !
Equally qualified, position open to disabled workers.
The EFINOR group, founded in 1988 by its current President Fabrice LEPOTIER, is an industrial group whose DNA is metal working. Our engineering, manufacturing and maintenance activities are mainly carried out in the naval, oil & gas, environmental and industrial sectors, in France and abroad. Our companies, experts and recognized in their fields, make it a point of honor to preserve the human dimension and the valorization of the commitment of its employees.
Within the framework of the development of its activities, several companies of the EFINOR group have to reinforce their teams by recruiting Boilermakers F/H.
Reporting directly to the local manager, you will manufacture new boilermade parts in the workshop, or repair used parts according to plans and associated directives. For this, your main missions will be the following:
With a CAP in boiler making up to a BTS in industrial boiler making, you have a first experience in the trade.
This position requires rigor, a taste for manual work and the ability to work in a team.
Your involvement, your professionalism and your team spirit are all assets that we are looking for for this position, they will allow you to develop a real career path within our Group.
The positions offered are full-time and open-ended, and are located in our Cherbourg workshops, in the Manche department (50).
Your salary will be offered according to your qualifications and experience.
Are you interested in this opportunity? Then don't wait any longer and apply online !
Equally qualified, position open to disabled workers.
